BondPlex is a bond multiplier containing a single active ingredient, Bis-Aminopropyl Diglycol Dimaleate. BondPlex works by finding single sulfur hydrogen bonds and cross linking them back together to form disulfide bonds before, during and after services. Disulfide bonds are broken via chemical, thermal, and mechanical processes. BondPlex is free of silicone, sulfates, phthalates, DEA, aldehydes.
BondPlex is a bond multiplier containing a single active ingredient, Bis-Aminopropyl Diglycol Dimaleate. BondPlex works by finding single sulfur hydrogen bonds and cross linking them back together to form disulfide bonds before, during and after services. Disulfide bonds are broken via chemical, thermal, and mechanical processes. BondPlex is free of silicone, sulfates, phthalates, DEA, aldehydes.
Know more on what you get with BondPlex
Make the bonds together
Minimize the damage
Restructure
Enhance the hair movement
Push the limits of hair lightning
Increase client retention
Compatible with all color lines
Can be used on all hair types with every chemical service
Any issues with lift, grey coverage, or processing time can be solved by using BondPlex
Do NOT increase developer. Do NOT increase processing time
Measurements based on color / bleach powder without developer
Know more on what you get with BondPlex
Make the bonds together
Minimize the damage
Restructure
Enhance the hair movement
Push the limits of hair lightning
Increase client retention
Compatible with all color lines
Can be used on all hair types with every chemical service
Any issues with lift, grey coverage, or processing time can be solved by using BondPlex
Do NOT increase developer. Do NOT increase processing time
Measurements based on color / bleach powder without developer
Simple two-step process includes a patented active ingredient that works on a molecular level to seek out broken bonds in the hair that are caused by chemical, thermal, and mechanical damage. You can use BondPlex to restore compromised hair.
1.Bond Multiplier
Rebuilding broken bonds and begins the process of preventing and repairing the damage hair.
2.Bond Perfector
Continues to rebuild and restore any remaining broken bonds. Ensuring the strongest, shiniest and healthiest hair possible.
1.Bond Multiplier
Rebuilding broken bonds and begins the process of preventing and repairing the damage hair.
2.Bond Perfector
Continues to rebuild and restore any remaining broken bonds. Ensuring the strongest, shiniest and healthiest hair possible.
BondPlex is compatible with all color lines including semi, demi, permanent, direct, high lift, glosses, toners and oil delivery systems.
Shampoo and blow dry.
Mix color and developer together.
For 100g or more of color (without developer), add 3.20ml BondPlex No.1. Use measuring cup to measure the correct amount of BondPlex needed.
**Again, please note, if client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Add BondPlex to your pre-mixed colour and mix thoroughly.
Apply and process as normal.
Rinse the hair.
Apply a generous amount of BondPlex No.2 Bond Perfector. Comb through and leave on for a minimum of 20 minutes.
Rinse and condition.
***Do NOT increase developer for color.
***High lift color is still considered color, please follow same directions as mentioned and do not increase developer.
***Any issues with processing time or gray coverage may be solved by using less BondPlex.
BondPlex is compatible with all color lines including semi, demi, permanent, direct, high lift, glosses, toners and oil delivery systems.
Shampoo and blow dry.
Mix color and developer together.
For 100g or more of color (without developer), add 3.20ml BondPlex No.1. Use measuring cup to measure the correct amount of BondPlex needed.
**Again, please note, if client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Add BondPlex to your pre-mixed colour and mix thoroughly.
Apply and process as normal.
Rinse the hair.
Apply a generous amount of BondPlex No.2 Bond Perfector. Comb through and leave on for a minimum of 20 minutes.
Rinse and condition.
***Do NOT increase developer for color.
***High lift color is still considered color, please follow same directions as mentioned and do not increase developer.
***Any issues with processing time or gray coverage may be solved by using less BondPlex.
BondPlex no longer requires to bump developer or increase processing time.
Pay special attention to the scoop size of bleach powder you are using. Scoop sizes vary per manufacturer. The amount of BondPlex used depends on the amount of bleach powder being used, not the amount of both developer and bleach powder combined.*
Shampoo and blow dry.
Mix bleach and developer together.
For 300g of lightener powder (not including developer), add 11.40ml BondPlex No.1. Use measuring cup to measure the correct amount of BondPlex needed.
For less than 1oz (30g) of lightener powder (not including developer, add 1/32oz (1ml) BondPlex No.1.
**If client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Add BondPlex to your pre-mixed lightener and mix thoroughly.
Note: You may add more bleach powder or developer if necessary to achieve desired consistency. We recommend remixing a new bowl of lightener and BondPlex if more than 2oz (60g) of bleach powder is needed.
Please use the same precautions as you always have when working with lighteners.
Processing Time of Lightener: THIS VARIES. We cannot tell you an average or approximate as every head of hair is different. Any issues with processing time or lift can be solved by using less BondPlex. As some lighteners provide 9+ levels of lift and others only 4, everything may be adjusted based on personal preference.
Heat: Heat is okay with BondPlex, but heat speeds up the chemical reaction of everything so be watchful and check every 3 to 5 minutes as you normally would. If hair is severely compromised, refrain from using heat until the reparative system has been used to restore the health, strength and integrity of the hair.
*It is common knowledge that bleach has a heat reaction to chlorine and other mineral deposits found in water and on hair. If you are having a heat reaction, this is not caused by BondPlex. This is caused by bleach interacting with minerals. Please rinse hair immediately if this occurs as BondPlex cannot prevent damage due to this reaction.
**Should you be bumping the developer for tonal or time reasons, please continue to do so.
Rinse, shampoo, dry
To tone down color, apply color from roots to ends. And leave for 20mins. Follow the hair coloring guidelines for this process.
Rinse well without shampoo.
Apply BondPlex No. 2 and leave for 20mins.
Rinse and condition
Blow dry and style.
*We recommend to do Stand Alone Treatment after for better results.
BondPlex no longer requires to bump developer or increase processing time.
Pay special attention to the scoop size of bleach powder you are using. Scoop sizes vary per manufacturer. The amount of BondPlex used depends on the amount of bleach powder being used, not the amount of both developer and bleach powder combined.*
Shampoo and blow dry.
Mix bleach and developer together.
For 300g of lightener powder (not including developer), add 11.40ml BondPlex No.1. Use measuring cup to measure the correct amount of BondPlex needed.
For less than 1oz (30g) of lightener powder (not including developer, add 1/32oz (1ml) BondPlex No.1.
**If client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Add BondPlex to your pre-mixed lightener and mix thoroughly.
Note: You may add more bleach powder or developer if necessary to achieve desired consistency. We recommend remixing a new bowl of lightener and BondPlex if more than 2oz (60g) of bleach powder is needed.
Please use the same precautions as you always have when working with lighteners.
Processing Time of Lightener: THIS VARIES. We cannot tell you an average or approximate as every head of hair is different. Any issues with processing time or lift can be solved by using less BondPlex. As some lighteners provide 9+ levels of lift and others only 4, everything may be adjusted based on personal preference.
Heat: Heat is okay with BondPlex, but heat speeds up the chemical reaction of everything so be watchful and check every 3 to 5 minutes as you normally would. If hair is severely compromised, refrain from using heat until the reparative system has been used to restore the health, strength and integrity of the hair.
*It is common knowledge that bleach has a heat reaction to chlorine and other mineral deposits found in water and on hair. If you are having a heat reaction, this is not caused by BondPlex. This is caused by bleach interacting with minerals. Please rinse hair immediately if this occurs as BondPlex cannot prevent damage due to this reaction.
**Should you be bumping the developer for tonal or time reasons, please continue to do so.
Rinse, shampoo, dry
To tone down color, apply color from roots to ends. And leave for 20mins. Follow the hair coloring guidelines for this process.
Rinse well without shampoo.
Apply BondPlex No. 2 and leave for 20mins.
Rinse and condition
Blow dry and style.
*We recommend to do Stand Alone Treatment after for better results.
Shampoo hair
If the hair is compromised, lightened, color-treated or previously permed, Apply the Stand Alone Procedure first before doing the Rebonding. Skip this process if normal or virgin hair.
Section the hair and apply 120g of Rebonding No. 1. Half inch starting from the nape area.
Leave the hair according to the developing time guideline.
Use your professional judgment when determining your test straight intervals. Check the softness, elasticity of the hair in every checking time on all vital parts.
Once the test straight is fully developed, comb through the hair. And without shampoo immediately rinse with lukewarm water as possible to flush away any residues.
100% dry the hair
Iron the hair
Add 15ml of BondPlex No.1 to Neutralizer 120g.
If client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Section the hair and apply the BondPlex Mixture on to the hair. Then leave for 20mins.
Rinse with cool water.
Shampoo hair
If the hair is compromised, lightened, color-treated or previously permed, Apply the Stand Alone Procedure first before doing the Rebonding. Skip this process if normal or virgin hair.
Section the hair and apply 120g of Rebonding No. 1. Half inch starting from the nape area.
Leave the hair according to the developing time guideline.
Use your professional judgment when determining your test straight intervals. Check the softness, elasticity of the hair in every checking time on all vital parts.
Once the test straight is fully developed, comb through the hair. And without shampoo immediately rinse with lukewarm water as possible to flush away any residues.
100% dry the hair
Iron the hair
Add 15ml of BondPlex No.1 to Neutralizer 120g.
If client requires more or less product, measurements may be changed. See BondPlex Mixing Chart for the accurate measurement.
Section the hair and apply the BondPlex Mixture on to the hair. Then leave for 20mins.
Rinse with cool water.
This service is designed to be performed at the shampoo bowl
We recommend applying to dry hair to see saturation. If client has product buildup such as oils or silicones, shampoo first and then apply to damp, towel dried hair
Mix 1/2oz (15ml) BondPlex No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take client to shampoo bowl and saturate thoroughly. Process for 10 minutes.
**Please note, if client requires more or less product, measurements may be changed. For short hair, mix 5ml BondPlex No.1 with 30ml water. For long hair, mix 16.70ml BondPlex No.1 with 100ml water. Or see our BlondPlex Mixing Chart
Without rinsing, apply a generous amount of BondPlex No.2 from roots to ends and comb through thoroughly.
Process for a minimum of 20 minutes.
Rinse and condition.
This service is designed to be performed at the shampoo bowl
We recommend applying to dry hair to see saturation. If client has product buildup such as oils or silicones, shampoo first and then apply to damp, towel dried hair
Mix 1/2oz (15ml) BondPlex No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take client to shampoo bowl and saturate thoroughly. Process for 10 minutes.
**Please note, if client requires more or less product, measurements may be changed. For short hair, mix 5ml BondPlex No.1 with 30ml water. For long hair, mix 16.70ml BondPlex No.1 with 100ml water. Or see our BlondPlex Mixing Chart
Without rinsing, apply a generous amount of BondPlex No.2 from roots to ends and comb through thoroughly.
Process for a minimum of 20 minutes.
Rinse and condition.
Fill out the form below and leave us a message. We will send an agent to your salon for free demonstrations of our product.
Fill out the form below and leave us a message. We will send an agent to your salon for free demonstrations of our product.